Plate Boundaries: Convergent, Divergent, and Transform Boundaries
- Track Progress
- 0:05 Introduction to Plate Boundaries
- 2:20 Divergent Boundary
- 3:30 Convergent Boundary
- 6:06 Transform Boundary
- 7:49 Lesson Summary
In the theory of plate tectonics, the earth's crust is broken into plates that move around relative to each other. As a result of this movement, three types of plate boundaries are formed: divergent, convergent, and transform boundaries.
Introduction to Plate Boundaries
I hope you have never been in a car accident, but I know we all have seen one in our lives. If you have watched many movies, you almost certainly have. Have you noticed how even when the car is no longer at the accident site, you can tell what happened to it - like where it was impacted, how fast it was going (or the other car was going), and what part was hit first? Even without impacts, perhaps you can piece together what happened when a scratch shows up on the side of the car. As tectonic plates of the earth, or giant pieces of the earth's crust, move and crash into each other, similar tell-tale signs show up to give us some ideas about how they move with relation to each other.
Introduction to Plate Boundaries
The theory of plate tectonics states that the crust of the earth is broken up into large pieces, or plates, that move around by floating on top of the liquid layer of the earth known as the mantle. This process is driven by convection currents within the mantle. Convection currents are formed by hot magma near the core rising towards the surface, while cooler magma near the crust sinks, setting up a current that causes the plates to move. These currents are the primary driving force behind plate movement. This theory was the result of decades of work and observations made of the earth's surface. It still is the first model to neatly explain all the pieces of data scientists couldn't explain when they thought the surface of the earth was stationary.
The map may seem confusing at first, but the main thing is that the colored lines show the lines where the crust is broken up into many different plates. Most are named after the continents that are contained on them.
Some plates are entirely oceanic crust, or crust under the ocean, while others are a combination of oceanic and continental crust, which is crust of the continents. The boundary where two separate plates meet is where all the action occurs and is called a fault. A fault is a crack in the earth's crust resulting from the movement of the two plates.
Getting back to the example of cars, when two cars are next to each other, there are three possible ways for the cars to move with relation to each other. Plates act in a similar manner.
The first way two cars can move relative to each other is in divergent directions, like passing a car going the other way. Plates also can pull apart from each other. This is known as a divergent boundary. A divergent boundary is a fault where the two plates are moving away from each other.
Now, as plates pull apart, several things may occur. First of all, volcanic activity is common in these areas since mantle easily moves to the surface through the thin, fractured rock as it separates. Volcanoes are a sign of a divergent boundary. This happens all along the mid-ocean ridge where magma is constantly streaming to the surface, creating new ocean floor as the plates separate.
If a continent happens to be a place where a divergent boundary occurs, then the continent will begin to be torn apart as the sides of the plates separate, creating a rift valley. The African Rift Valley in East Africa is an example of this occurrence. Eventually the ocean will separate East Africa from the rest, making a large island.
A second way cars interact (unfortunately) is by colliding. When cars impact each other or another solid object, the energy is transferred to the cars themselves, showing up as dents, ripples, or cracks. Plates also show tell-tale signs of colliding, too, depending on the kind of crust colliding.
Remember that at divergent boundaries, new crust is being made, but the earth is not getting larger. Why not? Well, at the opposite ends, crust is being pushed into the earth's interior by colliding plates and being re-melted at the same rate new crust is formed. This happens at a convergent boundary. A convergent boundary is a boundary where two separate plates are pushing into each other.
There are two kinds of surface features that are associated with a convergent boundary. The first is a deep ocean trench that forms a line of the two colliding plates. One plate made of oceanic crust can slide down underneath another plate, forming this narrow, deep trench. This happens because oceanic crust is more dense than continental crust, making it more likely to be pushed back into the mantle. These trenches are the deepest places on the face of the earth, extending over 30,000 feet below the ocean surface. You could take Mount Everest and sink it in the Mariana Trench, the deepest point in the ocean, and still have a mile to the surface of the ocean. That's deep!
As one plate is forced under the other one, it begins to melt, and a line of volcanoes forms in a parallel line to the trench. If the other plate is oceanic crust, the line of volcanoes will become islands, like the Philippines, and if it is continental crust, then it will become a line of volcanic mountains, like the Cascade Range in the western U.S. or the Andes Mountains in South America.
If both plates are continental crust, the plates will crumple up as they collide, forming a high mountain range, much like the Himalayas. Continental crust is less dense than oceanic crust and does not get forced into the mantle. The crumpling of the continental crust is similar to two cars colliding, as in the example from earlier.
No matter which type of crust is colliding, you will see volcanic activity if one is oceanic crust because the more dense oceanic crust is pushed down into the mantle. As it is forced down, it begins to remelt, and the magma forces its way to the surface to form the volcanoes. All types will form strong earthquakes, forming from the plates grinding together as they slide under.
A third way that plates can interact is by sliding past each other. This would be like cars side-swiping each other. One car is moving one way and scrapes by one going the other way. Tectonic plates do this as well, grinding past each other as they move in opposite directions. This third type of plate boundary is called a transform boundary.
The most famous example of a transform boundary is the San Andreas Fault in California. The San Andreas Fault is the edges of the Pacific Plate and the North American Plate. The fault line runs through the Gulf of California and through the western part of California before running back under the ocean. The Pacific Plate is moving northwest with respect to the rest of North America at the rate of several centimeters per year.
This means that thousands of years in the future, San Francisco and Los Angeles will be on a piece of land that will break off from the rest of North America and move out into the Pacific Ocean as an island. Remember that this piece of North America is on a different plate, and the whole thing is moving. This part of California is not drifting around like a boat in the ocean. It's moving as a part of the whole plate, which is moving northwest.
At this type of boundary, the only effects are earthquakes. The sliding process is not smooth and moves in fits and starts. The pressure for the plate to move builds over time, and the rocks compress and strain. At some point, the stored energy is released as the plates move, which can be several feet at one time. When it does, an earthquake occurs. There are no mountains or volcanoes forming from this boundary, no matter how many Hollywood movies are made that portray volcanoes erupting in Los Angeles.
To recap, there are three types of plate boundaries that are formed by the interactions of different plates. Divergent boundaries are boundaries where plates pull away from each other, forming mild earthquakes and volcanoes as magma comes to the surface.
Convergent boundaries are boundaries where two plates are pushing into each other. They are formed when two plates collide, either crumpling up and forming mountains or pushing one of the plates under the other and back into the mantle to melt. Convergent boundaries form strong earthquakes, as well as volcanic mountains or islands, when the sinking oceanic plate melts.
The third type is transform boundaries, or a boundary where plates slide past each other, forming strong earthquakes. All of this crashing, banging, and erupting are one reason why the surface of the earth has such a variety of landforms and features.
Ask Our Experts
Response times may vary by topic.
Our experts can answer your question related to:
- Requirements for Different Careers
- Enrolling in College
- Transferring Credit
- And More…
Chapters in Science 101: Intro to Natural Sciences
- 1. Atomic Structure (10 lessons)
- 2. Properties of Matter (10 lessons)
- 3. Fundamentals of Thermodynamics (13 lessons)
- 4. Mechanics (7 lessons)
- 5. Relativity (6 lessons)
- 6. Electricity (11 lessons)
- 7. Magnetism (6 lessons)
- 8. Waves, Sound, and Light (18 lessons)
- 9. The Universe (18 lessons)
- 10. Atmospheric Science (6 lessons)
- 11. Geology (9 lessons)
- 12. Biomolecules (9 lessons)
- 13. Biology of the Cell (15 lessons)
- 14. Biochemistry Foundations (13 lessons)
- 15. Chemical Nature of the Gene (12 lessons)
- 16. Cell Processes (12 lessons)
- 17. Introduction to Plant Biology (16 lessons)
- 18. Human Anatomy (36 lessons)
- 19. Animal Reproduction, Growth and Development (8 lessons)
- 20. Genetics (10 lessons)
- 21. Ecology (11 lessons)
- 22. Evolution: Theories and Principles (8 lessons)
- 23. The Origin and History of Life On Earth (4 lessons)
- 24. Phylogeny and the Classification of Organisms (7 lessons)
- 25. Human and Social Biology (6 lessons)
People are saying…
"This just saved me about $2,000 and 1 year of my life." — Student
"I learned in 20 minutes what it took 3 months to learn in class." — Student